Finn-Power SP-series crimping machines with open C-frame structure are optimal for crimping any odd shape, bent or otherwise complex hose assemblies.

SP100 with 10 ton force is specially designed for small automotive hoses.

SP100 also available in following configurations:
Z-model with separate crimping head and hydraulic unit
S-model with enhanced cycle time
D-model with double head configuration

Control:
ICC (7" touch screen)

Options:

Foot pedal (Z-model)
Auto greasing G3
Remote control (R1, R2)
Quality control ICC3
Graphical quality control ICC4
Interface pack ETH (Communication TCP/IP & UDP)
A3 signal (cable not included)
Bar Code Reader BCR
Auto greasing G3
ICC 12” display

SP100

Crimping range (1)	10-46mm
Max crimping force	100KN
Cycle time 10 mm (s) (2)	1.9 (S-model: 0.9)
Hose size ID	11/4"
Die set series	SP100
Max. opening (mm) (4)	+11/+62
Master die D/L	70/40mm
Master die D/L	2.75/1.58"
Motor Power	3.0 kW
Oil tank volume	50L
Dimensions Length Width Height	814mm 782mm 1670mm
Weight	383 KG

1) With standard dies. Crimping range can be increased with special dies.
2) Theoretical with 10mm cycle.
3) See table for die set data.
4) Maximum opening is the total die travel. Add this value to the minimum crimping diameter of the die set used. The result is the maximum opening of the machine with die set in place.

Die Set No.	D(mm)	L(mm)	Crimp range (mm)
70187/10	10	40	10.0-12.0
70187/12	12	40	12.0-14.0
70187/14	14	40	14.0-16.0
70187/16	16	40	16.0-19.0
70187/19	19	40	19.0-23.0
70187/23	23	40	23.0-27.0
70187/27	27	40	27.0-31.0
70187/31	31	40	31.0-36.0
70187/36	36	40	36.0-41.0
70187/41	41	40	41.0-47.0
70187/47	47	40	47.0-54.0

In addition to the standard die sets, a wide range of special die sets is available on request.

SP100

TECHNICAL DATA

DIE SET 100-SERIES

TECHNICAL DATA SHEET